# NIST SP 800-53 Rev. 5 PE-13(1) — Detection Systems -- Automatic Activation And Notification

- Source: https://support.icompaas.com/compliance/nist-sp-800-53-rev-5/pe-13-1-detection-systems-automatic-activation-and-notification
- Section: [Compliance](https://support.icompaas.com/compliance) › [NIST SP 800-53 Rev. 5 Controls](https://support.icompaas.com/compliance/nist-sp-800-53-rev-5) › PE — Physical and Environmental Protection
- Last updated: 2026-06-05
- Publisher: iCompaas, Inc. (https://www.icompaas.com)

**NIST SP 800-53 Rev. 5**·Control `PE-13(1)`·high·Component: **Physical and Environmental Protection**

## What this control requires

> Requires automatic fire detection systems that notify designated personnel and emergency responders during a fire. Systems must identify authorized individuals for access to restricted areas and use independent power sources to ensure reliable operation, protecting assets and ensuring safety. This control supports the Automatic Fire Detection and Notification System: Includes smoke/heat detectors, control panels, and notification devices that activate on fire detection, alerting predefined personnel and responders, with battery backup for reliability. capability within the Physical and Environmental Protection family.
> 
> — NIST SP 800-53 Rev. 5, Control PE-13(1)

### In plain English

Requires automatic fire detection systems that notify designated personnel and emergency responders during a fire. In practice, this means you can prove you access system-level controls on a defined cadence.

## Why it matters

SP 800-53 is the catalogue every U.S. federal authorisation (FedRAMP, FISMA, CMMC) and most regulated industries point at. A missing control surfaces as a Plan of Action & Milestones (POA&M) item that an Authorizing Official must approve before the Authority To Operate is granted or renewed.

This control is rated **high**. Auditors expect a named owner, a remediation SLA, and a tooling artefact that evidences continuous operation.

## What an auditor looks for

A 3PAO (FedRAMP) or Independent Assessor (NIST RMF) tests against NIST SP 800-53A assessment procedures. For each control they expect a documented implementation that addresses every assessment objective (Examine, Interview, Test) and an implementation summary in the System Security Plan.

Within **Physical and Environmental Protection**, the assessor will trace your implementation back to the catalogue reference (Control PE-13(1)) and look for objective evidence on the latest two assessment cycles.

## How to implement

#### Endpoint Protection

**MDM.** Make MDM enrollment a hard gate for device access (Intune compliance + Conditional Access, or Jamf + Okta device trust). Unmanaged devices simply don't get a session token.

**EDR.** Deploy CrowdStrike / SentinelOne / Defender for Endpoint to every server and laptop; alert on any host that stops sending telemetry for >24h.

### Operational checklist

-   **Access.** Document the trigger, the owner and the cadence.
-   **Security.** Document the trigger, the owner and the cadence.
-   **Detection.** Document the trigger, the owner and the cadence.
-   **Physical.** Document the trigger, the owner and the cadence.
-   **Notification.** Document the trigger, the owner and the cadence.
-   **Scope:** system, personnel, notification, controls, protection, sources, capability, systems.

## Evidence to collect

-   **User Device Scan.** MDM compliance state per user device (Intune / Jamf / Workspace ONE).

Endpoint compliance telemetry (Intune, Jamf) proves managed coverage. Focus: Detection Systems -- Automatic Activation And Notification.

## Common pitfalls

-   Pilot MDM rollouts that quietly exclude executives or engineers; carving out the highest-risk users is the most common audit failure.

## Related controls in NIST SP 800-53 Rev. 5

-   [**Control PE-13(2)** — Suppression Systems -- Automatic Activation And Notification](https://support.icompaas.com/compliance/nist-sp-800-53-rev-5/pe-13-2-suppression-systems-automatic-activation-and-notification)
-   [**Control PE-10** — Emergency Shutoff](https://support.icompaas.com/compliance/nist-sp-800-53-rev-5/pe-10-emergency-shutoff)
-   [**Control SC-42** — Sensor Capability And Data](https://support.icompaas.com/compliance/nist-sp-800-53-rev-5/sc-42-sensor-capability-and-data)
-   [**Control SC-5(1)** — Restrict Ability To Attack Other Systems](https://support.icompaas.com/compliance/nist-sp-800-53-rev-5/sc-5-1-restrict-ability-to-attack-other-systems)
-   [**Control PE-5** — Access Control For Output Devices](https://support.icompaas.com/compliance/nist-sp-800-53-rev-5/pe-5-access-control-for-output-devices)
-   [**Control PE-5(3)** — Marking Output Devices](https://support.icompaas.com/compliance/nist-sp-800-53-rev-5/pe-5-3-marking-output-devices)

## References

-   [NIST Computer Security Resource Center — NIST SP 800-53 Rev. 5](https://csrc.nist.gov/Projects/risk-management/sp800-53-controls)
-   Catalogue identifier: `Control PE-13(1)`

Topics: endpoint securityendpoint protectionenvironmental controls

## Related compliance guidance

- [NIST SP 800-53 Rev. 5: a practical implementation guide for cloud teams](https://support.icompaas.com/compliance/nist-sp-800-53-rev-5): Start with the full NIST SP 800-53 implementation guide — scope, roadmap, evidence and how the assessment runs.
- [NIST SP 800-171 and CMMC: a practical guide to protecting CUI in the cloud](https://support.icompaas.com/compliance/nist-sp-800-171-rev-3): If your obligation is protecting CUI in your own systems for a federal or defence contract, this derived subset — not the full catalogue — is the requirement.
- [SOC 2 compliance: a practical implementation guide for cloud-native SaaS teams](https://support.icompaas.com/compliance/soc-2-trust-services-criteria): Most commercial SaaS already hold a SOC 2 Type 2, and FedRAMP 20x Class A is designed for providers that have one.