# Ensure DHCP Server Services Are Disabled and Not Running

- Source: https://support.icompaas.com/support/solutions/articles/62000235158-ensure-dhcp-server-services-are-disabled-and-not-running
- Section: [Solutions](https://support.icompaas.com/support/solutions) › [CIS Amazon Linux 2 Benchmark v3.0.0](https://support.icompaas.com/support/solutions/62000112696) › [CIS Amazon Linux 2 Benchmarks](https://support.icompaas.com/support/solutions/folders/62000169265)
- Last updated: 2026-05-29
- Publisher: iCompaas, Inc. (https://www.icompaas.com)

**Profile Applicability:** • Level 1

**Description:** DHCP server services dynamically assign IP addresses and network configuration to clients. If the system is not intended to act as a DHCP server, these services should be disabled to reduce unnecessary network exposure and prevent potential unauthorized network configurations.

**Rationale:** Disabling unused DHCP server services minimizes the attack surface and prevents unintended network behavior or misconfigurations.

**Impact:** Pros:

-   Reduces risk of unauthorized IP address assignments.  
    
-   Limits network exposure and potential attack vectors.  
    

Cons:

-   Disabling DHCP server services on systems that require them may cause network issues.  
    

**Default Value:** DHCP server services may be enabled by default on some systems.

**Pre-requisites:**

-   Root or sudo privileges to manage system services.  
    

**Remediation:**

### **Test Plan:**

**Using Linux command line:**

1\. Check if DHCP server service is enabled:  

systemctl is-enabled dhcpd  
systemctl is-enabled isc-dhcp-server

2\. Check if DHCP server service is running:  

systemctl status dhcpd  
systemctl status isc-dhcp-server

### **Implementation Plan:**

**Using Linux command line:**

1\. Disable DHCP server services:  

systemctl disable dhcpd  
systemctl disable isc-dhcp-server

2\. Stop running DHCP server services:  

systemctl stop dhcpd  
systemctl stop isc-dhcp-server

3\. Verify services are disabled and stopped:  

systemctl is-enabled dhcpd  
systemctl is-enabled isc-dhcp-server  
systemctl status dhcpd  
systemctl status isc-dhcp-server

### **Backout Plan:**

**Using Linux command line:**

1\. Enable and start DHCP server services if required:  

systemctl enable dhcpd  
systemctl start dhcpd  
systemctl enable isc-dhcp-server  
systemctl start isc-dhcp-server

2\. Verify service status.  

**References:**

-   CIS Amazon Linux 2 Benchmark v3.0.0  
    
-   Systemd Service Management

## Related compliance guidance

- [SOC 2 compliance: a practical implementation guide for cloud-native SaaS teams](https://support.icompaas.com/compliance/soc-2-trust-services-criteria): Configuration checks like this one are the technical half of a SOC 2 / ISO 27001 programme — the guide shows where they fit, what else an auditor expects, and how to evidence them.
- [ISO/IEC 27001:2022 compliance: a practical implementation guide](https://support.icompaas.com/compliance/iso-27001-2022): ISO 27001 Annex A.8 (technological controls) is where cloud hardening evidence lands; the guide shows how to run the ISMS around it.
