# Ensure IPv6 Router Advertisements Are Not Accepted

- Source: https://support.icompaas.com/support/solutions/articles/62000235326-ensure-ipv6-router-advertisements-are-not-accepted
- Section: [Solutions](https://support.icompaas.com/support/solutions) › [CIS Amazon Linux 2 Benchmark v3.0.0](https://support.icompaas.com/support/solutions/62000112696) › [CIS Amazon Linux 2 Benchmarks](https://support.icompaas.com/support/solutions/folders/62000169265)
- Last updated: 2026-05-29
- Publisher: iCompaas, Inc. (https://www.icompaas.com)

**Profile Applicability:** • Level 1

**Description:**  
IPv6 router advertisements are used for network configuration in IPv6 environments. Accepting unsolicited or malicious router advertisements can lead to network misconfigurations or man-in-the-middle attacks. Disabling acceptance of IPv6 router advertisements enhances network security.

**Rationale:** Rejecting unauthorized IPv6 router advertisements helps prevent attackers from manipulating network settings and routing.

**Impact:** Pros:

-   Protects against malicious network configuration changes.  
    
-   Enhances integrity of IPv6 routing.  
    

Cons:

-   May disrupt legitimate IPv6 network functionality in some environments.  
    

**Default Value:** Acceptance of IPv6 router advertisements may be enabled by default.

**Pre-requisites:**

-   Root or sudo privileges to modify IPv6 network settings.  
    

**Remediation:**

### **Test Plan:**

**Using Linux command line:**

1\. Check current settings for IPv6 router advertisement acceptance:  

sysctl net.ipv6.conf.all.accept\_ra  
sysctl net.ipv6.conf.default.accept\_ra

2\. Confirm both values are set to 0 (disabled).

### **Implementation Plan:**

**Using Linux command line:**

1\. Disable acceptance of IPv6 router advertisements temporarily:  

sysctl -w net.ipv6.conf.all.accept\_ra=0  
sysctl -w net.ipv6.conf.default.accept\_ra=0

  

2\. Persist the settings by adding to /etc/sysctl.conf or a file in /etc/sysctl.d/:  

net.ipv6.conf.all.accept\_ra = 0  
net.ipv6.conf.default.accept\_ra = 0

### **Backout Plan:**

**Using Linux command line:**

1\. Re-enable acceptance of IPv6 router advertisements if necessary:  

sysctl -w net.ipv6.conf.all.accept\_ra=1  
sysctl -w net.ipv6.conf.default.accept\_ra=1

2\. Update configuration files accordingly and reload sysctl.  

**References:**

-   CIS Amazon Linux 2 Benchmark v3.0.0  
    
-   Linux sysctl Documentation  
    
-   [NIST SP 800-53 Revision 5 - SC-7  
    ](https://csrc.nist.gov/publications/detail/sp/800-53/rev-5/final#sc-7)

## Related compliance guidance

- [SOC 2 compliance: a practical implementation guide for cloud-native SaaS teams](https://support.icompaas.com/compliance/soc-2-trust-services-criteria): Configuration checks like this one are the technical half of a SOC 2 / ISO 27001 programme — the guide shows where they fit, what else an auditor expects, and how to evidence them.
- [ISO/IEC 27001:2022 compliance: a practical implementation guide](https://support.icompaas.com/compliance/iso-27001-2022): ISO 27001 Annex A.8 (technological controls) is where cloud hardening evidence lands; the guide shows how to run the ISMS around it.
