# Ensure nftables Default Deny Firewall Policy Is Configured

- Source: https://support.icompaas.com/support/solutions/articles/62000235367-ensure-nftables-default-deny-firewall-policy-is-configured
- Section: [Solutions](https://support.icompaas.com/support/solutions) › [CIS Amazon Linux 2 Benchmark v3.0.0](https://support.icompaas.com/support/solutions/62000112696) › [CIS Amazon Linux 2 Benchmarks](https://support.icompaas.com/support/solutions/folders/62000169265)
- Last updated: 2026-05-29
- Publisher: iCompaas, Inc. (https://www.icompaas.com)

**Profile Applicability:** • Level 1

**Description:**  
 A default deny firewall policy blocks all incoming and forwarding traffic unless explicitly allowed by firewall rules. Configuring nftables with a default deny policy helps protect the system by preventing unauthorized access.

**Rationale:** Implementing a default deny policy reduces the attack surface by allowing only necessary and explicitly permitted traffic, thereby enhancing network security.

**Impact:** Pros:

-   Provides strong baseline protection against unauthorized connections.  
    
-   Encourages explicit definition of allowed traffic.  
    

Cons:

-   Misconfiguration may block legitimate traffic, causing connectivity issues.  
    

**Default Value:** Nftables does not enforce a default deny policy unless configured.

**Pre-requisites:**

-   Root or sudo privileges to manage nftables rules.  
    

**Remediation:**

### **Test Plan:**

**Using Linux command line:**

1\. List nftables rules to verify default policies:  

nft list table inet filter

2\. Confirm default policy for input and forward chains is set to drop.  

### **Implementation Plan:**

**Using Linux command line:**

1\. Set default policies to drop if not already set:

nft chain inet filter input { type filter hook input priority 0 \\; policy drop \\; }  
nft chain inet filter forward { type filter hook forward priority 0 \\; policy drop \\; }

2\. Reload or apply nftables configuration.  

### **Backout Plan:**

**Using Linux command line:**

1\. Change default policies back to accept if necessary:

nft chain inet filter input { policy accept \\; }  
nft chain inet filter forward { policy accept \\; }

2\. Reload nftables configuration.  

**References:**

-   CIS Amazon Linux 2 Benchmark v3.0.0  
    
-   nftables Documentation  
    
-   [NIST SP 800-53 Revision 5 - SC-7  
    ](https://csrc.nist.gov/publications/detail/sp/800-53/rev-5/final#sc-7)

## Related compliance guidance

- [SOC 2 compliance: a practical implementation guide for cloud-native SaaS teams](https://support.icompaas.com/compliance/soc-2-trust-services-criteria): Configuration checks like this one are the technical half of a SOC 2 / ISO 27001 programme — the guide shows where they fit, what else an auditor expects, and how to evidence them.
- [ISO/IEC 27001:2022 compliance: a practical implementation guide](https://support.icompaas.com/compliance/iso-27001-2022): ISO 27001 Annex A.8 (technological controls) is where cloud hardening evidence lands; the guide shows how to run the ISMS around it.
